Utilicor MPX-SS Coring Unit
Coring Equipment
How can we help?
(301) 874-5500
Specifications
CAPACITIES - Coring Drum Depth: |
up to 22" |
CAPACITIES - Coring Drum Diameter: |
up to 24” |
CAPACITIES - Drum Speed: |
0 - 280 RPM |
CAPACITIES - Side Shift Capacity: |
10” either side of center |
CAPACITIES -Water Tank: |
100 Gallons |
DIMENSIONS - Length: |
102" |
DIMENSIONS - Width: |
65" |
WEIGHTS - Empty Water Tank: |
3400 lbs. |
WEIGHTS - Full Water Tank: |
4234 lbs. |
Links
RearBumper (optional -truck mount only)
Integrated wrap around checker plate bumper with licence plate mount and light.
Basic Coring Package (extra)
12”, 18" or 24” diameter ProCor diamond segment coring drum with "A" flange drive adapter, steel pilot shaft, pilot bit, pavement protection impact plate, standard core-puller, and Utilibond mixing paddle.
Hydraulic System
26.5 H.P. gas engine creates over 18 GPM of hydraulic flow at 2200 PSI. Hydraulic gear pump, hydraulic cooling system complete with 15 gallon hydraulic reservoir. Includes suction and return lines, sight glass, temperature gauge, fill port, drain port and oil filter, with proportionate hydraulic valves.
Coring and Manipulator Assembly
Dual stage mast deployment system accommodates a variety of deck levels or trailer heights. Up to 24" diameter wet drilling core bit capacity with linear glide system and proportional orbital hydraulic drum feed system.
Stabilizers
Two rear mounted hydraulic stabilizers.
High Pressure Wash System (optional)
Hydraulically driven high-pressure water pump, 5.5 G.P.M. @ 1500 P.S.I. with 15 ft of 3/8” hose and high-pressure handgun.
Control System
Plug in remote pendant control with 15ft cable extension for operation of manipulator/cutter assembly and stabilizers, with boom mounted control panel, emergency shutdown switch and digital coring drum R.P.M. read out. Cold weather start up system. Dash mounted ignition key and throttle controlled from the rear of the unit.
Understructure
Steel tubing, running the full deck length with six bolt down assemblies for installation onto truck or trailer.
Winterizing System (optional)
Wintering system for operation in colder climates.
Paint
Sand blasted, powder coated primer and powder coated finish coat. (50% gloss black)
Recommended Vehicle Specifications:
Pick up truck or flat bed truck
GVRW 9900 lbs. or greater
8 foot truck bed (min.)
Required Tow Vehicle
Trailer brake with adjustable gain
Trailer light hook up
2” receiver or greater with 5000 lbs. capacity
Accommodates Deck Heights:
26” up to 40” (specify deck height on order)
Storage (optional - trailer mount only)
Two side-mounted locking storage boxes.
(36”W x 20”D x 10”H)
Water System
100 USG plastic water tank. Electric water pump, 3 G.P.M. @ 30 P.S.I. and includes 1/2” diameter water hose running to gland assembly on cutter drive shaft for cooling of cutter head and auxiliary hose for cleaning and cooling outside of cutter.
Core Hoist (optional)
500 lb capacity core hoist. (12V)
Side Shift Feature
The side-shift positioning system allows the core drill to be shifted side-to-side 20-inches across the width of the MPX-SS Coring Unit. Hydraulically actuated.
Utilicor Trailer Specifications (Optional)
Tandem axle trailer with 5500 lbs. capacity
Axles: 2 x 3500 lbs.
Axle type: spring with double eye overslung
Electric brakes (both axles)
Breakaway switch with battery kit· Adjustable Pintle
NATM certified
Connector: 7 pin commercial
Paint: black epoxy
Safety chains: 5/16” gold chains and hooks
Wiring: sealed harness
Weight: 1200 lbs.
Dimensions: 98”L x 72”W (trailer bed) Overall length: 149”